EV Components IM-NE801&MD0630T01A For Finland&Norway

Inventory of electric vehicles in the Nordic region has grown since 2010, with 70% of the region's inventory located in Norway. Four of the five Nordic countries have an EV market share of more than 2%. All 5 countries are going through the process of developing the share of plug-in hybrid vehicles.On Norway's roads, 1 in 16 cars is electric, well above the level of 1 in 50 cars in the Nordic region. In Denmark and Norway, pure electric vehicles are more preferred by locals, while in Finland, Iceland and Sweden, plug-in hybrids dominate the market for electric vehicles.

Actually in 2017, the number of charging ports for electric vehicles (such as car charging piles) was close to 264,000, of which 16,000 were for public use. More than 94% of charging facilities are installed in the home or workplace, and the location of these devices also reflects the preference of EV users to use the car during the day and charge it most nights.The rapid development of electric vehicles has also increased people's demand for charging piles. In order to ensure charging safety, charging pile accessories are essential. To this end, IVY has proposed several charging pile accessories, which have a certain response in the Nordic market. Among them, the IM-NE801 power relay and MD series leakage monitoring equipment have a strong response. Several customers in Norway, Finland and Sweden have asked about these products. Below, a brief introduction to these two EV accessories.

There are two standards for the automobile charging pile industry, the national standard 16A and the national standard 32A. The current size is different, and the rated current of the selected relay will be different. The car charging pile has slow charging and fast charging. The cost of slow charging is lower than fast charging, slow charging The relay is used for fast charging, and the high-voltage contactor is used for fast charging. It works up to 7kv and consumes high power at the same time. Now the main advantage is slow charging. The slow charging 16A standard generally uses 40A current relays. IVY IM-NE801 two sets of 32A, 40A power relays just meet this requirement. It has a contact spacing of 3mm, and the isolation withstand voltage is as high as 4kV, which improves the arc resistance of the contacts and prolongs the service life of the relay. In addition, it has passed UL certification and meets IEC standards.

There are four modes of electric vehicle charging. On the above, a protection box (IC-CPD) is equipped on the charging cable, which can display and protect when fault current is generated; mode three is to charge by AC charging pile; mode four is to charge by DC charging pile. In order to ensure the safety of the charging process, many automakers, especially foreign automakers and domestic joint venture automakers, require protection against DC 6mA leakage according to the standard IEC 62752-2016. The traditional leakage detection technology cannot achieve the detection of DC 6mA. IY's MD series leakage sensor can meet this requirement, and can detect various other possible complex waveform leakage (Type B leakage) leakage current sensor as IC-CPD The most important key components to realize the function of leakage protection play a vital role in the protection of human body during the charging process. And our leakage current sensor can set the leakage current in direct current and alternating current applications, and generate an alarm signal when the set current is reached, and can output a switch control signal. At the same time, it has a digital output function, which can read the current value of DC and AC. At present, it is common in the market to simultaneously monitor or output an alarm signal for a single AC or DC leakage current, which plays an important role in the observation of the entire system.

With the vigorous construction of charging piles in Nordic countries such as Norway, Finland and Sweden, the safety of charging equipment cannot be ignored. IVY MD series leakage current monitors can monitor residual current and output alarm signals to avoid leakage hazards and ensure personal safety. If you want to know more EV accessories, please visit our website: https://www.ivy-metering.com/ev-charger-parts/ or leave us a message.