Thing About Repairing
In our daily life, it is not difficult to see that when equipment is damaged, the equipment in the factory is also subject to regular maintenance and management. However, do you know:
1. Equipment maintenance, equipment inspection, equipment repair is there any difference?
2. What is the common equipment damage?
3. What are the warnings behind the high repair costs?
4. How to reduce the repair rate of equipment?
First of all, equipment maintenance refers to keeping the equipment clean, tidy, well-lubricated, operating safely, tightening loose fasteners in time, and adjusting the spacing of activities. In summary, the 5 letters operation method is "cleaning, lubricating, tightening, adjusting, and anticorrosive." "The life of the equipment is very important to the usual maintenance. Equipment inspection is the measurement and verification of equipment operation, working accuracy, wear or corrosion. Equipment inspection is often to identify or eliminate hidden dangers in equipment. The repair of equipment is to repair equipment damage and accuracy cracking caused by daily or non-daily reasons. Replace the worn, aging or corroded parts, so that the performance of the equipment can be restored.
As mentioned above, equipment damage is often due to performance damage caused by daily or non-daily reasons. For example, many parts of electric meters, instrumentation and equipment have been used year after year, such as relay aging. If the meter is out of order, the Relay will no longer trip in special circumstances such as the exhaustion of the balance or the theft of electricity. Another example is that a factory's automation equipment is burnt due to transient overload or overcurrent due to unstable voltage or improper operation by new manual personnel.
When we hear the word damage, we feel that it is a loss. We can’t help but feel that our wallets seem to be thinner. In fact, this repair fee is also a reminder to everyone, when you have a very important or very professional device. At times, such as the test bench and calibration bench of electric meters, you must choose a reliable brand with good performance and high safety factor, pay attention to the use of equipment training, do daily maintenance, and regularly check the equipment, and the equipment is damaged. If things are small, the lives of workers are greater than the sky.
The problem of reducing the repair rate of equipment usually requires the factory to keep your eyes open when purchasing equipment, and it is more important to go to the manufacturer of the equipment to pay attention to these issues. 1. The rationality of the design must be tried for a while before bulk purchases. Time, run in with this equipment to see if there will be any unexpected problems. 2. The quality of the components and the life of the equipment are not only related to the correct use, but also directly related to the components inside, as large as the material of the shell. , As small as a small component on the PCB, it is best to be a reliable high-quality brand. 3. Many equipment factories blindly seek to reduce costs and use inferior relays, resulting in the electrical life and mechanical life not being reached at all. The contacts of the relay are sticky, and the use of second-hand raw materials leads to oxidation of the hardware, and so on.
IVY does not sell machinery and equipment, but IVY has always been a good friend of electric device or power equipment. We are committed to ensuring the on-off of equipment, truly effective measurement, worry-free on-off, abnormal alarm, and real-time sensing. Among them, our relays correspond to worry-free on-off, no hidden dangers in safety, and at the same time, the electrical life and mechanical life have passed the UC2/UC3 test of the TUV laboratory. If you need power relay or latching relay for repairing, please log on www.ivy-metering.com to learn about our products or log on www.ivy-electronic.com to buy samples directly.
