Product parameters
Product Introduction
MD0630T01A-2 is an integrated small size RCD leakage current sensor. It has the characteristics of high sensitivity, correct measurement, small size and compact/integration design. It can be set separately for AC and DC leakage. When leakage current is detected, an alarm signal is generated, It is an automotive grade smallest leakage current sensor also called residual current monitoring (RCM), residual current detection (RCD), differential current sensor, GFCI, leakage current detector and fault current sensor. Dedicated to detect to Type B(AC/A/EV/F) leakage current measurement.
MD series residual current monitor is an ideal protection device. Where the EV supply equipment is equipped with a socket-outlet or vehicle connector for AC use in accordance with IEC 62196(all parts), protective measures against DC fault current shall be taken. In the IEC 61851-1, it is clearly specified that residual current protection in AC charging equipment shall adopt type B or type a +6ma smooth DC RCD. At the same time, it is clearly stated in the relevant IC-CPD standard iec62752-2018 that the residual current protection device shall detect smooth DC 6mA.
It allows the protection of electric vehicle charging points. AC and DC leakage current detection with DC component. It detects fault currents with a DC component greater than 6mA. MD0630T01A-2 is widely used in GFCI, residual current device and other electrical safety protection device like EV Charging, photovoltaic systems (solar panels), industrial device, medical device, new energy, DC screen, fire distribution cabinet, IOT field. It is the technology that brings us closest to total protection for all known residual fault currents.
Product Features
Ultra-small, Flexible, Integration Design, Residual current range 2~100 mA
Switching output for 6 mA DC/30 mA (IEC) or 5 mA /20 mA (UL 2231)
Error(Fault) output (Integrated self-monitoring and test functions)
Digital Output, Measurement resolution DC 0.2 mA AC 0.3mA
Full load current up to 200A (1-phase) or 150A (3-phase)
AC DC Leakage Data Readable; Alarm Value Programmable; 3 Way Alarm Outputs
Robust mechanical design suitable for harsh electronic environments
Total system cost significantly reduced compared to type B RCCB
UART Comm. with Modbus Protocol; Standard: EN 61000-6-3:2007+A1 ,EN IEC 61000-6-1:2019
Product Parameters
Wide voltage input: 12V±20%
Measuring current range: DC current 2-15mA; AC current 3-100mA (default threshold: DC 6mA, AC 30mA)
Accuracy : at 25℃, DC±0,2mA, AC±0.3mA
Installation: PCB/Pin/Vertical Type
Three outputs: DC alarm, AC alarm, AC/DC alarm
Working environment temperature: -25℃～+80℃
Appearance: Plastic case, small SIP package
EV Charging Application
With the vigorous development of the electric vehicle industry, the performance of IC-CPD products belonging to the distribution accessories of electric vehicles plays an important role in the protection of vehicle and personal safety. Type B RCD or Type A RCD and appropriate equipment that ensures the disconnection of the supply in case of DC fault current above 6mA.
